TINTGEL™ · DOT MATRIX FIX · WATER-SOLUBLE

TintGel™ creates a smoother result on the automotive glass dot matrix

TintGel™ fills the black dotted area on automotive glass and helps the window film lie more evenly against the glass. The result is a smoother, more transparent surface without the white air gap that can otherwise appear around the dot matrix.

Quick facts

Use:
Dot matrix and the outer edges of the window film

Compatibility:
All types and brands of window film

Application:
Thin layer applied with a bristle or foam brush

Drying time:
Approximately 15 minutes before installation

Temperature:
Apply at a minimum of +15 °C

Cleaning:
Dissolves with lukewarm water and a cloth

A smoother dot matrix

Fills the spaces between the raised dots on the glass and reduces the visible white air gap.

Helps prevent edge lift

Forms a transparent bond that helps keep the film in place along edges and corners.

For multiple film types

Suitable for removable window film and professional adhesive window film, regardless of brand.

Easy to wash off

The water-soluble gel can be removed with lukewarm water and a soft cloth.

NO MORE EDGE LIFT

Helps keep edges and corners in place

Window film can lift at edges and corners due to the installation or because the dot matrix dots are thick and dense. TintGel™ fills the uneven areas and acts as a transparent bond between the glass and the window film.

On removable window film, TintGel™ can also be applied along the outer edges before installation to provide extra hold.

CLEAN AND PRACTICAL FORMULA

Odourless and water-soluble

TintGel™ is odourless, water-soluble and contains no hazardous chemicals. If the gel is applied incorrectly or needs to be removed, it can be dissolved with lukewarm water and a cloth, even after it has been dry for a long time.

Please note: Brush not included. Use a small bristle or foam brush to apply a thin, even layer.